Payment & Shipping Terms:
|Type Of Seating Assembly:||Cup Seating||Model:||20-125-RWAC|
|Type:||Thin Wall Pump||Barrel Material:||Carbon Steel|
|Plunger Coating:||Spray Metal||API 11AX No.:||0061|
20-125-RWAC Oilfield Sucker Rods,
2-3/8" Oilfield Sucker Rods,
2-3/8" hydraulic rod pump
20-125-RWAC Thin Walled Cup Seating Sucker Rod Pump
Thin Walled Cup Seating Sucker Rod Pump Description
Cup top seating sucker rod pump is the cup seating assembly rod pump.
There is a wide range of plunger (or pump-bore) sizes standardized by the industry. The API pump-bore sizes that are currently available range from 1 1/16 to 3 3/4 in. in diameter. This 1 1/16-in. size has been added back in the latest edition of the standard. Additionally, a new barrel type has been accepted in the latest API Spec. 11AX. This is the "X-type" barrel. It has a thin-walled barrel configuration for threads on either end of the heavy-walled barrel and is available for metal plungers only. This type of pump does not require the extension couplings normally needed for heavy-walled barrel pumps. Thus, this pump reduces the burst or collapse concerns of the thin-walled extension couplings and allows deeper producing depths to be attained.
Technical parameter list:
|Specification||Pump diameter (in)||Barrel length (ft)||Plunger length (ft)||Stroke length (ft)||Extension length (ft)||Tubing size EUE(in)|
2. The material of cup seating assembly is composite, so the cup seating sucker rod pump is suitable for oil well with lower temperature
3. Thin wall pump
Contact Person: judy