Cases

Contacts

Contacts: Mrs. Liza

Tel: 86-029-89296933

Fax: 86-393-4807842

Contact Now

Mail Us

API11AX sucker rod pump factory

2025-11-05

API 11AX down Hole Insert RHA Sucker Rod Pump Oilfield Pumping Equipment for Deep Oil WellsAPI 11AX Oilfield Sucker Rod Pump Price

The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. Thus it is convenient for the inspection and workover because they can be pulled up and down through the tubing and suitable for deeper well. The life span of tubing can be prolonged for decreasing the times of the thread of the tubing being turned on and off and the time of the workover. The rod pump can be classified into two types of mechanical seating and cup seating. Also it is divided into three types as RHA (stationary heavy well barrel top anchor rod pump), RHB (stationary heavy well barrel bottom anchor rod pump) and RHT (travelling heavy well barrel bottom anchor rod pump).

latest company news about API11AX sucker rod pump factory 0

latest company news about API11AX sucker rod pump factory 1

Technology

Model	Nominal Dia. mm(in)	Plunger Length m(ft)	Stroke m	Pump Constant m3/d	In Sucker Rod
20-125TH	32(1.25)	1.2-1.8 (4-6)	0.6-7.3	1.14	¾
25-125TH	32(1.25)		0.6-7.3	1.14	¾
20-150TH	38(1.50)		0.6-7.3	1.64	¾
25-150TH	38(1.50)		0.6-7.3	1.64	¾
20-175TH	44(1.75)		0.6-7.3	2.24	¾
25-175TH	44(1.75)		0.6-7.3	2.24	¾
25-225TH	57(2.25)		0.6-7.3	3.69	¾
30-275TH	70(2.75)		0.6-7.3	5.50	?
35-325TH	83(3.25)		0.6-7.3	7.70	?
40-375TH	95(3.75)		0.6-7.3	10.26	1

latest company news about API11AX sucker rod pump factory 4

Production Flow

latest company news about API11AX sucker rod pump factory 5

Detailed Images

latest company news about API11AX sucker rod pump factory 6

Main parts process and material:
Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ordinary carbon steel carburizing (B2), low alloy steel nitride (B5).

Barrels shall be additionally inspected, with a frequency of 100 %, according to the following:

Barrel inside surface finish shall be visually inspected on all barrels per manufacturer’s specifications.

The inside diameter sealing surface of barrels shall be inspected with appropriate equipment, and in such a manner, that assures the specified tolerances are maintained through the entire length of the barrel.

latest company news about API11AX sucker rod pump factory 7

latest company news about API11AX sucker rod pump factory 8
Plunger: 1045 steel spraying (B1), 1045 steel spraying (B2), 1045 steel chrome plating (A1), 1045 steel double chrome plating (A2).

latest company news about API11AX sucker rod pump factory 9

latest company news about API11AX sucker rod pump factory 10

Valve ball and seat: stainless steel (A1), cobalt chromium (B2), tungsten carbide (C1), nickel and carbon compounds (C2), titanium carbide (C3).

Ball and seat assemblies shall be additionally inspected, with a frequency of 100 %, according to the following:

All ball and seat assemblies shall be vacuum tested, with dry sealing surfaces, at 19 in. (483 mm) Hg minimum vacuum with no leakage for a minimum of

3 seconds after vacuum source is isolated. Ball shall be randomly rotated in the seat during the test.

latest company news about API11AX sucker rod pump factory 11
Other accessories:

Puyang Zhongshi Group Co., Ltd.

Products

Quick links

Company Profile Factory Tour Quality Control News Sitemap Privacy Policy

News

Cases

API11AX sucker rod pump factory

Sucker Rod Pump

Downhole Pumps

Rod Insert Pump

Oilfield Pump Parts

Well Pump Tubing

Cement Float Equipment

Bow Spring Centralizer